QGPN | Description | Status | Cell Chemistry | # Series Cells | Battery Charge Voltage (V) |
Charge Current (A) |
Vin (V) |
Charging Control Topology | Control Interface | Special Features |
|
|
|
|
|
|
|
|
|
|
|
BQ24188 | 2A, 30V, Host-Controlled Single-Input, Single Cell Switchmode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Programmable | 2 | 30 | Switchmode Buck | I2C | Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path Standard BAT Temp Monitoring Under Voltage Protection |
BQ25100H | 250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.35 | 0.25 | 30 | Linear | Standalone | JEITA BAT Temp Monitoring |
BQ24232H | USB-Friendly Lithium Based Battery Charger With Power-Path For 4.35V Batteries | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.35 | 0.5 | 28 | Linear Switchmode Buck |
Standalone | Integrated FET Over Voltage Protection Power Path Standard BAT Temp Monitoring Under Voltage Protection |
BQ24266 | 3A, 30V Standalone Single-Input, Single-Cell Switchmode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 3 | 30 | Switchmode Buck | Standalone | Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path Standard BAT Temp Monitoring Under Voltage Protection |
BQ25071 | 1A, Single-Input, Single-Cell LiFePO4 Linear Battery Charger with 50mA LDO | ACTIVE | LiFePO4 | Single Cell | 3.6 | 1 | 30 | Linear | Standalone | Integrated FET Over Voltage Protection Standard BAT Temp Monitoring |
BQ24262 | 3A, 30V, Host-Controlled Single-Input, Single Cell Switchmode Li-Ion Battery Charger with USB OTG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Programmable | 3 | 30 | Switchmode Buck | I2C | Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path Standard BAT Temp Monitoring Under Voltage Protection |
BQ24297 | I2C Controlled 3A Single Cell USB NVDC-1 Charger with Adjustable Voltage USB OTG | ACTIVE | Adjustable | 3 | 6 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
||
BQ24253 | 2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2 | 10.5 | Switchmode Buck | Standalone | |
BQ24773 | 1-4S I2C NVDC Battery Charge Controller with System Power Monitor & Processor Hot Indicator | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 30 | Switchmode Buck | I2C | |
BQ24770 | 1-4S SMBus NVDC Battery Charge Controller with System Power Monitor & Processor Hot Indicator | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 30 | Switchmode Buck | SMBus | |
BQ24250C | 2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2 | 20 | Switchmode Buck | I2C Standalone |
Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path |
BQ24045 | Li-Ion Battery Charger for Single Cell Applications with 4.35V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.35 | 1 | 6.45 | Linear | Standalone | |
BQ24081-Q1 | 1-A, Single Chip, Li-Ion and Li-Pol Automotive Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ40Z60 | Complete Multi-Cell Battery Manager | Battery Fuel (Gas) Gauge | ACTIVE | Li-Ion/Li-Polymer LiFePO4 |
2-4 Cells | Battery Management Unit Cell Balancing Integrated Protector SHA-1 Authentication Turbo Mode |
|||||
BQ25101 | 250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.25 | 30 | Linear | Standalone | JEITA BAT Temp Monitoring |
BQ25100 | 250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.25 | 30 | Linear | Standalone | |
BQ24251 | 2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2 | Switchmode Buck | I2C Standalone |
||
BQ24250 | 2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2 | 20 | Switchmode Buck | I2C Standalone |
Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path Under Voltage Protection |
BQ24187 | Single-Input, Single Cell Switchmode Li-Ion Battery Charger | PREVIEW | Li-Ion/Li-Polymer | Single Cell | 3.6 | 2 | 30 | Switchmode Buck | I2C | JEITA BAT Temp Monitoring Over Voltage Protection Standard BAT Temp Monitoring Under Voltage Protection |
BQ24296 | I2C Controlled 3A Single Cell USB NVDC-1 Charger with Adjustable Voltage USB OTG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 3 | 6 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
BQ24261M | 1S, 3A, 30V, Single-Input Switchmode Li-Ion Battery Charger with Power Path and USB-OTG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Programmable | 3 | 30 | Switchmode Buck | I2C | Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Power Path Standard BAT Temp Monitoring Under Voltage Protection |
BQ24296M | I2C Controlled 3A Single Cell USB NVDC-1 Charger with Adjustable Voltage USB OTG | ACTIVE | Li-Ion/Li-Polymer | Adjustable | 3 | 6 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
|
BQ25101H | 250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.35 | 0.25 | 30 | Linear | Standalone | JEITA BAT Temp Monitoring |
BQ24295 | I2C Controlled 3A Single Cell USB Charger with Adjustable Voltage and 1.5A OTG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 3 | 6 | Switchmode Buck | I2C | Over Voltage Protection Power Path Standard BAT Temp Monitoring |
BQ24257 | 2A Single Input I2C/Standalone Switch-Mode Li-Ion Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2 | 20 | Switchmode Buck | I2C Standalone |
Integrated FET JEITA BAT Temp Monitoring Over Voltage Protection Under Voltage Protection |
BQ24715 | 2-3 Cell Li+ Battery SMBus NVDC-1 Charge Controller with N-Channel MOSFET Selectors | ACTIVE | Li-Ion/Li-Polymer | Adjustable | 10 | 24 | SMBus | |||
BQ25100A | 250-mA Single Cell Li-Ion Battery Charger, 1mA termination, 75nA Battery leakage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.3 | 0.25 | 30 | Linear | Standalone | |
BQ24292I | I2C Controlled 4.5A Single-Cell USB/Adapter Charger With Narrow VDC Power Path Management | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 4.5 | 17 | Switchmode Buck | I2C | Power Path |
BQ24072T | 1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 6.4 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24163 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 10 | Switchmode Buck | I2C | Power Path |
BQ24195 | I2C Controlled 2.5A/4.5A Single Cell Charger with 5.1V 1.3A/2.1A Synchronous Boost Operation | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 4.5 | 17 | Switchmode Buck | ||
BQ24133 | Synchronous Switch-Mode Li-Ion and Li-Polymer Stand-Alone Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2, 8.4, 12.6 | 2.5 | 17 | Switchmode Buck | Standalone | Power Path |
BQ24193 | I2C Controlled 4.5A Single Cell USB/Adaptor Charger w/ Narrow VDC Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 4.2 | 17 | I2C | JEITA BAT Temp Monitoring Power Path |
|
BQ24171 | JEITA Compliant Stand-Alone Switch-Mode Li-Ion and Li-Polymer Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 4 | 17 | Switchmode Buck | Standalone | JEITA BAT Temp Monitoring Power Path |
BQ24157 | Fully Integrated Switch Mode One Cell Li-Ion Charger with Full USB-Compliance. | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 1.25 | 6.5 | Switchmode Buck | I2C | ||
BQ24707A | 1-4 Cell Li+ Battery SMBus Charge Controller With Independent Comparator and Advanced Circuit Prot. | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 24 | SMBus | ||
BQ24095 | 1 A, Single-Input, Single-Cell Li-Ion and Li-Pol Battery Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.35 | 1 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24168 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path Management & and I2C | ACTIVE | Adjustable | 2.5 | 6 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
||
BQ24192I | I2C Controlled 4.5A Single Cell USB/Adaptor Charger w/ Narrow VDC Power Path | ACTIVE | Li-Ion/Li-Polymer | Adjustable | 4.5 | 17 | Switchmode Buck | I2C | Power Path | |
BQ24052 | 1A, Single-Input, Single Cell Li-Ion Battery Charger with Automatic AC/USB Detection, Rntc=100k | ACTIVE | 4.2 | 1 | 28 | Standalone | ||||
BQ25060 | 1A, Single-Input, Single Cell Li-Ion Battery Charger with 50mA LDO | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 30 | Linear | Standalone | Power Path |
BQ24040 | 1A Single-Input, Single Cell Li-Ion Battery Charger. Vovp=6.6V | Linear | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 28 | Standalone | ||
BQ25040 | 1.1A, Single-Input, Single Cell Li-Ion Battery Charger With 50mA LDO in 2x3 QFN | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.2 | 6.5 | Linear | Standalone | |
BQ24160A | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 10 | Switchmode Buck | I2C | Power Path |
BQ24195L | I2C Controlled 2.5A/4.5A Single Cell Charger with 5.1V 1.3A/2.1A Synchronous Boost Operation | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 17 | Switchmode Buck | I2C | |
BQ24105-Q1 | Automotive Catalog Standalone Synchronous Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1 to 3 Cell | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 2 | 16 | Switchmode Buck | Standalone | |
BQ24192 | I2C Controlled 4.5A Single Cell USB/Adaptor Charger w/ Narrow VDC Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 4.5 | 17 | Switchmode Buck | I2C | Power Path |
BQ24196 | I2C Controlled 2.5A Single Cell USB/Adaptor Charger w/ Narrow VDC Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 17 | Switchmode Buck | I2C | Power Path |
BQ24392 | Charger detection device supporting BCDv1.2 with integrated USB2.0 switch | ACTIVE | ||||||||
BQ24041 | 1A Single-Input, Single Cell Li-Ion Battery Charger with Auto Start. Vovp=7.1V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 28 | Standalone | ||
BQ24190 | I2C Controlled 4.5A Single Cell USB / Adaptor Charger | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 4.5 | 17 | Switchmode Buck | I2C | |
BQ24161B | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path* | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 10 | Switchmode Buck | I2C | JEITA BAT Temp Monitoring Power Path |
BQ24271 | 1.5A, Single-Input, Single Cell Switchmode Li-Ion BATTERY CHARGER with Power Path Management and I2C | ACTIVE | Li-Ion/Li-Polymer | Adjustable | 1.5 | 6.5 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
|
BQ24270 | 1.5A, Single-Input, Single Cell Switchmode Li-Ion BATTERY CHARGER with Power Path Management and I2C | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 6.5 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
BQ24165 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path Management | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2.5 | 10 | Switchmode Buck | I2C | Power Path |
BQ24160 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path | ACTIVE | Adjustable | 2.5 | 10 | Switchmode Buck | I2C | Power Path | ||
BQ24161 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 2.5 | 10 | Switchmode Buck | I2C | Power Path |
BQ24170 | 1.6-MHz Synchronous Switch-Mode Li-Ion and Li-Polymer Stand-alone Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 4 | 17 | Switchmode Buck | Standalone | Power Path |
BQ24707 | High-Frequency, High Performance SMBus Charge Controller | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 24 | Switchmode Buck | SMBus | |
BQ24079T | 1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.1 | 1.5 | 6.4 | Linear | Standalone | Power Path |
BQ24075-Q1 | Automotive Catalog USB-Friendly Li-Ion Battery Charger and Power-Path Management IC, Vout 5.5V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 6.4 | Linear | Standalone | Power Path |
BQ25070 | 1A, Single cell, Linear Charger for LiFePO4 Applications | ACTIVE | LiFePO4 | Single Cell | 3.5 | 1 | 30 | Standalone | Power Path | |
BQ24630 | Stand-Alone Synchronous Switch-Mode Lithium Phosphate Battery Charger with System Power Selector | ACTIVE | LiFePO4 | Adjustable | 10 | 28 | Standalone | Power Path Standard BAT Temp Monitoring |
||
BQ24079 | 1.2A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.1 VBAT | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.1 | 1.5 | 6.4 | Linear | Standalone | Power Path |
BQ24735 | 1-4 Cell Li+ Battery SMBus Charge Controller for Supporting Turbo Boost Mode | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | Switchmode Buck | SMBus | ||
BQ24158 | Fully Integrated Switch-Mode One-Cell Li-Ion Charger with Full USB-Compliance, VOVP=6.5v | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 1.25 | 6 | Switchmode Buck | I2C | Standard BAT Temp Monitoring | |
BQ24155 | Fully Integrated Switch-Mode One-Cell Li-Ion Charger with Full USB Compliance | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 1.2 | 6 | Switchmode Buck | I2C | Standard BAT Temp Monitoring | |
BQ24090 | 1A, Single Input, Single Cell Li-Ion Battery Charger w/ 10kΩ NTC | Li-ion Linear Battery Charger IC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | |
BQ24172 | 1.6-MHz Synchronous Switch-Mode Li-Ion and Li-Polymer Stand-alone Battery Charge | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 4 | 17 | Switchmode Buck | Standalone | Power Path |
BQ24075T | 1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 6.4 | Linear | Standalone | Power Path |
BQ24093 | 1A, Single-Input, Single-Cell Li-Ion Battery Charger with Operation Over JEITA and 100kΩ NTC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | JEITA BAT Temp Monitoring |
UC2909-EP | Enhanced Product Switch-mode Lead-Acid Battery Charger with Differential Current Sense | ACTIVE | Lead Acid | 2-4 Cells | >2 | 40 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring | |
BQ24092 | 1A, Single-Input, Single-Cell Li-Ion Battery Charger with Operation Over JEITA and 10kΩ NTC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | JEITA BAT Temp Monitoring |
BQ24620 | 28V Synchronous Switch-Mode Charge Management IC for Lithium Phosphate Batteries | ACTIVE | LiFePO4 | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 28 | Standalone | Standard BAT Temp Monitoring | |
BQ24617 | Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger with 5V–24V VCC Input | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 24 | Switchmode Buck | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24753A | Host-Controlled Li-Ion and Li-Polymer Battery Charger with Low Iq and System Power Selector | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | 10 | 24 | Switchmode Buck | SMBus | Power Path |
BQ24450 | Integrated Charge Controller for Lead-Acid Batteries | ACTIVE | Lead Acid | 2-4 Cells | Adjustable | >2 | 40 | Linear | Standalone | |
BQ24166 | 2.5A, Dual-Input, Single Cell Switchmode Li-Ion Battery Charger with Power Path Management | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2.5 | 10 | Switchmode Buck | I2C | Power Path |
BQ24140 | 1.5A Dual Input Switchmode Charger with USB-OTG Support | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 1.5 | 9 | Switchmode Buck | Power Path | |
BQ24640 | High Efficiency Synchronous Switch-Mode Battery Charge Controller for Super Capacitor | ACTIVE | Adjustable | 10 | 28 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring | ||
BQ24610 | Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger with 5V–28V VCC Input | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 28 | Switchmode Buck | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24765 | SMBus Controlled Battery Charger with Integrated FETs | ACTIVE | LiFePO4 | 2-4 Cells Single Cell |
Adjustable | 4 | 24 | Switchmode Buck | SMBus | Integrated FET Power Path |
BQ24130 | 600-kHz Synchronous Switch-Mode Li-Ion and Li-Polymer Host-Controlled Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 4 | 17 | Switchmode Buck | Standalone | |
BQ24616 | JEITA Compatible Stand-Alone Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 28 | Switchmode Buck | JEITA BAT Temp Monitoring Power Path Standard BAT Temp Monitoring |
|
BQ24600 | Standalone Synchronous Switch-mode Charge Controller | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 28 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24055 | 1A, Single-Input, Single Cell Li-Ion Battery Charger with Automatic AC/USB Detection and PG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 28 | Standalone | ||
BQ25050 | 1A, Single-Input, Single Cell Li-Ion Battery Charger with 50-mA LDO | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 30 | Linear | Standalone | Power Path |
BQ24091 | 1A, Single-Input, Single-Cell Li-Ion Battery Charger with 100kΩ NTC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | ||
BQ24031-Q1 | Automotive Catalog Dual Input Li-Ion Charger with Dynamic Power-Path Management, Output Regulated to | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.1 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24725A | 1-4 Cell Li+ Battery SMBus Charge Controller with N-Channel Power MOSFET Selector | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 24 | Switchmode Buck | SMBus | |
BQ24618 | Stand-Alone USB-Friendly Synchronous Switch-Mode Li-Ion or Li-Polymer Battery Charger | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells >4 Cells Single Cell |
Adjustable | 10 | 28 | Switchmode Buck | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24050 | 1A, Single-Input, Single Cell Li-Ion Battery Charger with Automatic AC/USB Detection. | Linear | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 28 | Standalone | ||
BQ24232 | USB Friendly 0.5A Li+ Charger w/ Dynamic Power Management, 10.5V OVP | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 10.2 | Linear | Standalone | Over Voltage Protection Power Path |
BQ24073 | USB-Friendly Li-Ion Battery Charger and Power-Path Management IC, Vout 4.4V | ACTIVE | Li-Ion/Li-Polymer | 4.2 | 1.5 | 6.4 | Power Path | |||
LP3919 | CDMA Cellular Phone Power Management Unit | ACTIVE | ||||||||
BQ24230 | USB Friendly 0.5A Li+ Charger w/ Dynamic Power Management, 6.6V OVP | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 6.5 | Linear | Standalone | Over Voltage Protection Power Path |
BQ24740 | Multi-Cell Synchronous Switch-mode Battery Charger | PREVIEW | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | 10 | 24 | Switchmode Buck | Power Path Standard BAT Temp Monitoring |
|
BQ24060 | Linear 1-Cell Li-Ion Charger w/Thermal Regulation, 6.5V OVP, Temp Sense | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Standalone | Over Voltage Protection Standard BAT Temp Monitoring |
BQ24027 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Charge Enable & AC Present, No Taper | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | ||
BQ24103 | Standalone Synchronous Switch-mode Li-Ion Charger w/2A FET in QFN-20, 1- or 2-cell | ACTIVE | Li-Ion/Li-Polymer | 4.2 | 2 | 16 | ||||
BQ25895 | Single Cell 5A Fast Charger MaxCharge(TM) Technology for High Input Voltage and 3.1A Boost | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 3.8-4.6 | 5 | 14 | Switchmode Buck | I2C | Power Path |
BQ24074 | USB-Friendly Li-Ion Battery Charger and Power-Path Management IC, 10.5V OVP | ACTIVE | 4.2 | 1.5 | 10.2 | Linear | Standalone | Over Voltage Protection Power Path |
||
BQ24113 | Host-controlled Synchronous Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1- or 2-cell | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 2 | 16 | Switchmode Buck | Standalone | |
BQ24013 | bqTINY(TM) Linear 1-cell Li-Ion Charger w/ 1-A FET, Charge Enable & Term Enable in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Standalone | |
BQ2004H | Switch-mode NiCd/NiMH Battery Charger w/Negative dV, Peak Voltage Detection, dT/dt Termination | ACTIVE | NiCd NiMH |
2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24780S | 1-4 Cell Hybrid Power Boost Mode Battery Charge Controller with Power and Processor Hot Monitoring | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
24 | Switchmode Buck | SMBus | Power Path | ||
BQ24032A | Dual Input Li-Ion Charger with Dynamic Power Path, Output regulated to 4.4V, Vbat 4.2V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24075 | USB-Friendly Li-Ion Battery Charger and Power-Path Management IC, Vout 5.5V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 6.4 | Linear | Standalone | Power Path |
BQ25017 | Dual Input Charger with Integrated Synchronous Buck Converter, Fixed Output 1.8V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 6.5 | Linear | Integrated Buck Converter | |
BQ24031 | Dual Input Li-Ion Charger with Dynamic Power-Path Management, Output Regulated to 6V Battery | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.1 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24072 | USB-Friendly Li-Ion Battery Charger and Power-Path Management IC, Vout 200mV above Vbat | Linear | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 6.4 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ25012 | 500mA Li-Ion Charger w/Integrated 150mA Synchronous Buck Converter, Output 1.8V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 6.5 | Linear | Integrated Buck Converter | |
BQ24201 | 500-mA, 4.1-V Li-Ion Charger for Current-Limited App. w/Temp Sense in MSOP-8 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 13.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24005 | Linear 2-cell Li-Ion Battery Charger w/Integrated FET, Two LED | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | 8.4 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |
BQ2002D | NiCd/NiMH Charge Controller with dT/dt Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ24298 | I2C Controlled Single Cell 3A USB Charger with NVDC Power Path and Adjustable Voltage USB OTG | ACTIVE | Li-Ion/Li-Polymer | Single Cell | Adjustable | 3 | Switchmode Buck | I2C | Power Path Standard BAT Temp Monitoring |
|
BQ24088 | 750 mA Single Chip Li-Ion/Li-Pol Charge Management IC with Thermal Regulation | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.75 | 6.5 | Linear | Standalone | |
BQ24104 | Synchronous Switchmode, Li-Ion & Li-Pol Charge Mngmt IC (bqSwitcher) | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 2 | 16 | Switchmode Buck | Standalone | |
BQ24086 | 750mA SINGLE-CHIP Li-Ion/Li-Pol CHARGE MANAGEMENT IC with Thermal Regulation | ACTIVE | 4.2 | 0.75 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring | ||
BQ24113A | Host-Controlled Synchronous Swithc-Mode Li-Ion Charger w/2A FET, 1 or 2 Cell | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 2 | 16 | Switchmode Buck | Standalone | |
BQ24071 | Li-Ion Charger with Dynamic Power-Path Management, Output regulated to 6V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24120 | Synchronous Switch-Mode 1-cell Li-Ion Charger w/2A FET, enhanced EMI performance | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2 | 16 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24087 | 750mA SINGLE-CHIP Li-Ion/Li-Pol CHARGE MANAGEMENT IC with Thermal Regulation | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.75 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24083 | 1-cell Li-Ion Charger w/ 4.06V Charge Voltage | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 4.2 | Linear | Standalone | |
BQ24745 | SMBus-Controlled Level 2 Multi-Chemistry Battery Charger With Input Current Detect Comparator | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 8 | 24 | Switchmode Buck | SMBus | Power Path |
BQ24024 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Term Enable & Temp Sense in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | |
BQ24022 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Charge Enable & Power Good in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | 4.2 | 1 | 6.5 | ||||
BQ24205 | 500-mA, 4.1-V Li-Ion Charger for Current-Limited App. in MSOP-8 | ACTIVE | 4.2 | 0.5 | 13.5 | Linear | Standalone | Integrated FET Standard BAT Temp Monitoring Under Voltage Protection |
||
BQ2004 | Switch-mode NiCd/NiMH Battery Charger w/Negative dV, Peak Voltage Detection, dT/dt Termination | ACTIVE | NiCd NiMH |
Adjustable | >2 | 5.5 | Standard BAT Temp Monitoring | |||
BQ24003 | Linear 1-cell Li-Ion Battery Charger W/Integrated FET, Bi-Color LED | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |
BQ2054 | Switch-mode Li-Ion Battery Charger in PDIP or SOIC Package | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24212 | 800mA, Single-Input, Single Cell Li-Ion Battery Solar Charger | PREVIEW | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.8 | Linear | Solar Input | ||
BQ24108 | Standalone Synchronous Switch-mode Li-Ion Charger w/2A FET in QFN-20, 1-Cell | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2 | 16 | Switchmode Buck | ||
BQ24081 | 1-cell Li-Ion Charger w/ 1-A FET, Timer Enable and Temperature Sensing | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24014 | bqTINY(TM) Linear 1-cell Li-Ion Charger w/ 1-A FET, Temp Sense & Charge Enable in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24006 | Linear 2-cell Li-Ion Battery Charger w/Integrated FET, Bi-Color LED | ACTIVE | Li-Ion/Li-Polymer | 8.4 | 1.2 | 10 | Standard BAT Temp Monitoring | |||
BQ24061 | Linear 1-Cell Li-Ion Charger w/Thermal Regulation, 6.5V OVP, Charge Enable | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Standalone | Over Voltage Protection |
LM3622 | Lithium-Ion Battery Charger Controller | ACTIVE | 0.015 | 24 | Linear | |||||
BQ24080 | 1-cell Li-Ion Charger w/ 1-A FET, AC Present and Charge Enable | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | |
BQ2000T | Switch-mode Multi-Chemistry Battery Charger with dT/dt Termination | ACTIVE | Li-Ion/Li-Polymer NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
LP3917 | CDMA Cellular Phone Power Management Unit | ACTIVE | ||||||||
BQ24012 | bqTINY(TM) Linear 1-cell Li-Ion Charger w/ 1-A FET, AC Present & Charge Enable in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | ||
BQ2002G | NiCd/NiMH Charge Controller with Negative dV and Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ2004E | Switch-mode NiCd/NiMH Battery Charger w/Negative dV, Peak Voltage Detection, dT/dt Termination | ACTIVE | NiCd NiMH |
Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring | |
BQ2002F | NiCd/NiMH Charge Controller with Negative dV and Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ25892 | 1S 5A Fast Charger MaxCharge(TM) Technology for High Input Voltage and Adjustable USB OTG Boost | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 3.8-4.6 | 5 | 14 | Switchmode Buck | I2C | JEITA BAT Temp Monitoring Power Path |
BQ2003 | Switch-mode NiCd/NiMH Battery Charger with Negative dV and dT/dt Termination | ACTIVE | NiCd NiMH |
2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ25890 | 1S 5A Fast Charger MaxCharge(TM) Technology for High Input Voltage and Adjustable USB OTG Boost | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 3.8-4.6 | 5 | 14 | Switchmode Buck | I2C | JEITA BAT Temp Monitoring Power Path |
BQ24125 | Single Chip Switchmode Li-Ion and Li-Polymer Charge Management IC with Enhanced EMI Performance | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 2 | 16 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24103A | Standalone Synchronous Switch-mode Li-Ion Charger with 2A FET | ACTIVE | Li-Ion/Li-Polymer | 4.2 | 2 | 16 | Switchmode Buck | Standalone | ||
BQ24123 | Synchronous Switch-Mode 2-cell Li-Ion Charger w/2A FET, enhanced EMI performance | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 2 | 16 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ2002C | NiCd/NiMH Charge Controller with Negative dV and Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ24702 | Multi-Chemistry Battery Charge Controller and System Power Selector | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | >2 | 28 | Switchmode Buck | Power Path | |
BQ24020 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Charge Enable & Temp Sense in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standard BAT Temp Monitoring | |
BQ24204 | 500-mA, 4.2-V Li-Ion Charger for Current-Limited App. in MSOP-8 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 13.5 | Linear | Standalone | Integrated FET Standard BAT Temp Monitoring Under Voltage Protection |
BQ24200 | 500-mA, 4.2-V Li-Ion Charger for Current-Limited App. w/Temp Sense in MSOP-8 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 13.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ2057 | Low Dropout Linear 1-cell Li-Ion Charge Controller with AutoCompTM, 4.1V | ACTIVE | Li-Ion/Li-Polymer | 4.1 | >2 | 15 | Standard BAT Temp Monitoring | |||
UC3906 | Linear Lead-Acid Battery Charger | ACTIVE | >2 | 40 | Linear | Standalone | ||||
BQ24085 | 750mA SINGLE-CHIP Li-Ion/Li-Pol CHARGE MANAGEMENT IC with Thermal Regulation | ACTIVE | Li-Ion/Li-Polymer | 4.2 | 0.75 | 6.5 | Standard BAT Temp Monitoring | |||
BQ25015 | Dual Input Charger with Integrated Synchronous Buck Converter, Output Adjustable | ACTIVE | Single Cell | 4.2 | 0.5 | 6.5 | Linear | Integrated Buck Converter | ||
LM3658 | Dual Source USB/AC Li Chemistry Charger IC for Portable Applications | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24023 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Charge Enable, Term Enable in QFN-10 | ACTIVE | 4.2 | 1 | 6.5 | Linear | Standalone | |||
LM3420 | Lithium-Ion Battery Charge Controller | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
4.2 | 0.015 | 20 | Linear | ||
BQ24202 | 500-mA, 4.2-V Li-Ion Charger for Current-Limited App. w/Charge Status in MSOP-8 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 13.5 | Linear | Standalone | Integrated FET Standard BAT Temp Monitoring Under Voltage Protection |
BQ2057T | Low Dropout Linear 2-cell Li-Ion Charge Controller with AutoCompTM, 8.2V | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | 8.2 | >2 | 15 | Linear | Standard BAT Temp Monitoring | |
BQ2954 | Switch-mode Li-Ion Charge Controller | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standard BAT Temp Monitoring | |
BQ24064 | Linear 1-Cell Li-Ion Charger w/ Thermal Regulation, 10.5V OVP, Temp Sense | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Over Voltage Protection Standard BAT Temp Monitoring |
|
BQ25010 | 500mA Li-Ion Charger w/Integrated 150mA Synchronous Buck Converter, Output Adjustable | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 6.5 | Linear | Integrated Buck Converter | |
BQ24026 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Timer Enable & Temp Sense, No Taper | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24115 | Host-controlled Synchronous, Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1 to 3 cells | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 2 | 16 | Switchmode Buck | Standalone | |
BQ24025 | bqTINY-II Dual Input USB/AC Adpater 1-Cell Li-Ion Charger w/Charge Enable & Temp Sense, 7hr Timer | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 6.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ2002T | NiCd/NiMH Charge Controller with dT/dt Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ2002E | NiCd/NiMH Charge Controller with Negative dV and Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ2005 | Switch-mode NiCd/NiMH Battery Charger for Sequential Charging Of Dual Battery Packs | ACTIVE | NiCd NiMH |
2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24030-Q1 | Automotive Catalog Single-Chip Charge and System Power-Path Management IC (bqTINY) | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24018 | Single Chip Li-Ion Charge Management IC for Handheld Applications (bqTINY) | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.3 | 1 | 16.5 | Linear | Standalone | Standard BAT Temp Monitoring |
LP3947 | USB/AC Adaptor, Single Cell Li-Ion Battery Charger IC | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.75 | 6 | Linear | I2C | Standard BAT Temp Monitoring |
BQ24703 | Multi-Chemistry Battery Charge Controller and System Power Selector | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | Adjustable | >2 | 28 | Switchmode Buck | Standalone | Power Path |
BQ24400 | Switch-mode NiCd/NiMH Battery Charger with Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24004 | Linear 2-cell Li-Ion Battery Charger w/Integrated FET, One LED | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | 8.4 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |
BQ2057C | Low Dropout Linear 1-cell Li-Ion Charge Controller with AutoCompTM, 4.2V | ACTIVE | Li-Ion/Li-Polymer | 4.2 | >2 | 15 | Linear | Standard BAT Temp Monitoring | ||
BQ2000 | Switch-mode Multi-Chemistry Battery Charger with Peak Voltage Detection Termination | ACTIVE | Li-Ion/Li-Polymer NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24070 | Li-Ion Charger with Dynamic Power-Path Management, Output regulated to 4.4V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24038 | Dual Input Li-Ion Charger with Dynamic Power Path, Output regulated to 4.4V, Vbat 4.4V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.3 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24401 | Switch-mode NiCd/NiMH Battery Charger with dT/dt Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24008 | Linear 1-cell Li-Ion Battery Charger W/Integrated FET, Bi-Color LED | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |
BQ2057W | Low Dropout Linear 2-cell Li-Ion Charge Controller with AutoCompTM, 8.4V | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells | 8.4 | >2 | 15 | Linear | Standard BAT Temp Monitoring | |
BQ2002 | NiCd/NiMH Charge Controller with Negative dV and Peak Voltage Detection Termination | ACTIVE | NiCd NiMH |
2-4 Cells Single Cell |
Adjustable | >2 | 6 | Current Limited | Standalone | Standard BAT Temp Monitoring |
BQ24109 | Synchronous Switchmode, Li-Ion & Li-Pol Charge Mngmt IC (bqSwitcher) | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2 | 16 | Switchmode Buck | Standalone | |
BQ24105 | Standalone Synchronous Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1 to 3 Cells | ACTIVE | Li-Ion/Li-Polymer | 2-4 Cells Single Cell |
Adjustable | 2 | 16 | Switchmode Buck | Standalone | |
BQ24100 | Standalone Synchronous Switch-mode Li-Ion Charger w/2A FET in QFN-20, 1-Cell | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 2 | 16 | Switchmode Buck | Standalone | |
BQ24010 | bqTINY(TM) Linear 1-cell Li-Ion Charger w/ 1-A FET, AC Present and Temp Sense in QFN-10 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1 | 16.5 | Linear | Standalone | Standard BAT Temp Monitoring |
BQ24007 | Linear 1-cell Li-Ion Battery Charger w/Integrated FET, One LED | ACTIVE | 4.2 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |||
BQ2031 | Switch-mode Lead-Acid Battery Charger with User-Selectable Charge Algorithms | ACTIVE | Lead Acid | 2-4 Cells | Adjustable | >2 | 5.5 | Switchmode Buck | Standalone | Standard BAT Temp Monitoring |
BQ24030 | Dual Input Li-Ion Charger with Dynamic Power-Path Management, Output regulated to 6V, Vbat 4.2V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24035 | Dual Input Li-Ion Charger with Dynamic Power Path, Output Cutoff at 6V, Vbat 4.2V | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.5 | 16 | Linear | Standalone | Power Path Standard BAT Temp Monitoring |
BQ24203 | 500-mA, 4.1-V Li-Ion Charger for Current-Limited App. w/Charge Status in MSOP-8 | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 0.5 | 13.5 | Linear | Standalone | Integrated FET Standard BAT Temp Monitoring Under Voltage Protection |
BQ24001 | Linear 1-cell Li-Ion Battery Charger w/Integrated FET, One LED | ACTIVE | Li-Ion/Li-Polymer | Single Cell | 4.2 | 1.2 | 10 | Linear | Standard BAT Temp Monitoring | |
UC2906 | Linear Lead-Acid Battery Charger | ACTIVE | Lead Acid | 40 | Linear |