| QGPN | Description | Configuration | Number of Channels (#) |
VCC (V) |
VCC (V) |
Ron (Ohms) |
Input/Ouput Voltage (V) |
Input/Ouput Voltage (V) |
ICC (uA) |
Bandwidth (MHz) |
ESD HBM (kV) |
Additional Features | Rating | Operating Temperature Range (C) |
Package Group | ESD Charged Device Model (kV) |
ICC (uA) |
Ron (Ohms) |
Crosstalk (dB) |
Off Isolation (dB) |
Input/Output OFF-state Capacitance (pF) |
Input/Output ON-state Capacitance (pF) |
ON-state resistance flatness (Ω) |
Powered-off leakage current (µA) |
Powered-on leakage current (µA) |
Propagation Delay (ns) |
Ron Channel Match (Ω) |
Ron Channel Match (Ω) |
Turn off Time (Disable) (ns) |
Turn on Time (Enable) (ns) |
OFF-state leakage current (µA) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BQ24392-Q1 | Automotive Charger Detection Device supporting BCDv1.2 with Integrated USB2.0 Switch | 1:1 SPST | 1 | 4.75 | 5.25 | 6 | 0 | 3.6 | 115 | 1000 | 4 | USB 2.0 BCv1.2 Charger Detection |
Automotive | -40 to 125 | UQFN | 1.5 | 80 | 8 | -30.5 | -26 | 2 | 11 | 1.1 | 0.5 | 0.075 | ||||||
| HD3SS3212 | HD3SS3212x Two Channel Differential 2:1/1:2 USB3.1 Mux/Demux | 1:2 SPDT | 2 | 3 | 3.6 | 5 | 0 | 2 | 800 | 8000 | USB 3.1 (Type-C) Logic Controlled (Output Enabled) |
Catalog | -40 to 85 0 to 70 |
VQFN | 0.5 | 600 | 8 | -90 | -75 | 0.8 | 0.6 | 0.5 | 500 | 500 | 20 | ||||||
| TSU8111 | Single Cell USB Charger with Two Integrated USB2.0 Switches and Accessory Detection | 1:2 SPDT | 2 | 1.65 | 6.5 | 8 | 0 | 3.6 | 150 | 820 | 12 | USB 2.0 Integrated Single-Cell Charger BCv1.1 Charger Detection Impedance Detection Thermal Regulation and Shutdown |
Catalog | -40 to 85 | DSBGA | -35 | -36 | 7.5 | 8.6 | 0.7 | 45 | 50 | 0.5 | 57000 | 52000 | ||||||
| TS5USBA224 | USB 2.0 High-Speed (480Mbps) and Audio Switches with Negative Signal Capability | 1:2 SPDT | 2 | 2.7 | 5.5 | 4 | -2.8 | 5.5 | 10 | 650 | 2 | USB 2.0 Audio Switch (Negative Rail Capability) Click-Pop Reduction |
Catalog | -40 to 85 | UQFN | 1 | 6 | 7 | -31 | -22 | 2.8 | 12.5 | 0.05 | 0.3 | 2000 | 1000 | |||||
| TS3USB221A-Q1 | Automotive ESD Protected,High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch | 1:2 SPDT | 2 | 2.3 | 3.6 | 3.4 | 0 | 5.5 | 30 | 900 | 7 | USB 2.0 Logic Controlled (Output Enabled) |
Automotive | -40 to 125 | UQFN | 1 | 6 | -40 | -41 | 3.5 | 6 | 1 | 2 | 1 | 0.25 | 0.5 | 10 | 17 | 1 | ||
| TS3USB3200 | USB 2.0 High-Speed and Mobile High-Definition Link Switch w/ ID Select and Flexible Power Control | 1:2 SPDT | 2 | 2.7 | 5.5 | 4.6 | 0 | 3.6 | 70 | 5500 | 3.5 | USB 2.0 Mobile High-Definition Link (MHL) Over-Voltage Tolerance (OVT) Current Leakage Protection Flexible Power Control Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 40 | -37 | -37 | 1.6 | 1.4 | 1 | 10 | 2 | 0.1 | 0.4 | 400 | 400 | 2 | ||
| BQ24392 | Charger detection device supporting BCDv1.2 with integrated USB2.0 switch | 1:1 SPST | 2 | 4.75 | 5.25 | 8 | 0 | 3.6 | 920 | 4 | USB 2.0 BCv1.2 Charger Detection |
Catalog | -40 to 85 | UQFN | 1.5 | 45 | -30.5 | -26 | 10 | 11 | 1.1 | 45000 | 50000 | 0.5 | |||||||
| TS3USB221E | High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable | 1:2 SPDT | 2 | 2.3 | 3.6 | 3 | 0 | 5.5 | 30 | 1000 | 7 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN VSON |
7 | 6 | -40 | -40 | 3.5 | 6 | 1 | 1 | 0.25 | 0.2 | 17 | 10 | 1 | |||
| TS3USB30E | High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single | 1:2 SPDT | 2 | 3 | 4.3 | 6 | 0 | 4.3 | 1 | 900 | 8 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN VSSOP |
1 | 10 | -54 | -40 | 2 | 7.5 | 2 | 2 | 0.25 | 0.35 | 25 | 30 | 1 | |||
| TS3USB3000 | DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch | 1:2 SPDT | 2 | 2.7 | 4.3 | 4.6 | 0 | 3.6 | 50 | 6100 | 3.5 | USB 2.0 Mobile High-Definition Link (MHL) Over-Voltage Tolerance (OVT) Current Leakage Protection Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 30 | 7.5 | -37 | -34 | 1.6 | 1.4 | 1 | 10 | 2 | 0.1 | 0.1 | 400 | 400 | 2 | |
| TS3USB221 | High-Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable | 1:2 SPDT | 2 | 2.3 | 3.6 | 0 | 5.5 | 30 | 2 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN VSON |
6 | -40 | -41 | 3 | 5 | 1 | 1 | 0.25 | 0.2 | 17 | 10 | 1 | ||||||
| HD3SS460 | 4 x 6 Channels USB Type-C Alternate Mode MUX | Alternate mode Mux or Demux | 4 | 3.0 | 3.6 | 8 | 0 | 2 | 900 | 5400 | USB 3.1 (Type-C) Logic Controlled (Output Enabled) Crosspoint |
Catalog | -40 to 85 0 to 70 |
WQFN | 1 | 600 | 14 | -80 | -50 | 150 | 1 | 1000 | 3000 | 5 | |||||||
| LP8727 | Micro - Mini USB Interface with Integrated 28V Linear Charger | 1:3 SP3T | 2 | 2.5 | 7 | 2.5 | -2 | 7 | 400 | 480 | 2 | USB 2.0 UART Audio Switch (Negative Rail Capability) BCv1.1 Charger Detection Standby Mode Integrated LDO Thermal Regulation and Shutdown Over-Voltage Tolerance (OVT) Undervoltage Lock Out (UVLO) I2C Interface |
Catalog | DSBGA | 3.6 | 0.6 | 0.2 | 10000 | 1000000 | 0.36 | |||||||||||
| TSU5511 | SP3T Switch with Impedance Detection Micro-USB Switch | 1:3 SP3T | 2 | 2.8 | 6.7 | 4.5 | -1.3 | 3.6 | 70 | 830 | 2 | USB 2.0 UART Audio Switch (Negative Rail Capability) Click-Pop Reduction Charging Capability I2C Interface Impedance Detection |
Catalog | -40 to 85 | DSBGA | 1 | 60 | 10 | -42 | -20 | 6.5 | 9 | 0.5 | 360 | 360 | 1.5 | 1 | ||||
| TS3USB3031 | DP3T USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.5GHz) Switch | 1:3 SP3T | 2 | 2.5 | 4.3 | 4.5 | 0 | 3.6 | 40 | 6500 | 2 | USB 2.0 Mobile High-Definition Link (MHL) Over-Voltage Tolerance (OVT) Current Leakage Protection Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | WQFN | 1 | 28 | 6 | -38 | -38 | 0.8 | 1 | 1 | 10 | 2 | 0.05 | 0.1 | 0.1 | 0.1 | 2 | |
| TSU6111A | Dual SP2T Micro-USB Switch with integrated impedance and charger detection | 1:2 SPDT | 2 | 3 | 6.5 | 8 | 0 | 3.6 | 75 | 920 | 5 | USB 2.0 UART BCv1.1 Charger Detection I2C Interface JIG and BOOT Support Attach and Detach Interrupt Surge Protection |
Catalog | -40 to 85 | UQFN | 1 | 15 | -32 | -26 | 7 | 9 | 0.5 | 0.2 | 0.2 | 2 | 0.5 | 95000 | 3500 | |||
| TSU6721 | USB Port Multimedia Load Switch Supports USB, UART, AUDIO, ID, MIC | 1:3 SP3T | 2 | 3 | 6.5 | 6 | -1.5 | 3.6 | 155 | 510 | 4 | USB 2.0 UART Audio Switch (Negative Rail Capability) ID Bypass Switch Charging Capability BCv1.2 Charger Detection I2C Interface JIG and BOOT Support Impedance Detection Attach and Detach Interrupt |
Catalog | -40 to 85 | DSBGA | 1.5 | 11 | -32 | -26 | 7 | 9 | 1.4 | 0.2 | 0.2 | 1 | 0.2 | 100000 | 130000 | |||
| TS3USB30 | High-Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable | 1:2 SPDT | 2 | 3 | 4.3 | 6 | 0 | 4.3 | 1 | 955 | 6 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 10 | -56 | -39 | 2 | 7 | 2 | 2 | 0.25 | 0.35 | 25 | 30 | 2 | |||
| HD3SS6126 | USB 3.0 Differential Switch 2:1/1:2 MUX/DEMUX | 1:2 SPDT | 3 | 3 | 3.6 | 5 | 0 | 1.8 | 3 | 10000 | 2 | USB 2.0 USB 3.0 |
Catalog | 0 to 70 | WQFN | 0.5 | 2.4 | 8 | -85 | -85 | 1 | 1.5 | 1 | 250 | 0.7 | 10 | 17 | 4 | |||
| TS3USB31 | High-Speed USB 2.0 (480-Mbps) 1-Port Switch With Single Enable | 1:1 SPST | 2 | 3 | 4.3 | 6 | 0 | 4.3 | 1 | 1220 | 6 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 10 | -53 | -30 | 2 | 6 | 2 | 2 | 0.25 | 0.35 | 25 | 30 | 1 | |||
| TSU6111 | Dual SP2T Micro-USB Switch with integrated impedance and charger detection | 1:2 SPDT | 2 | 3 | 6.5 | 8 | 0 | 3.6 | 75 | 920 | 2 | USB 2.0 UART BCv1.1 Charger Detection I2C Interface JIG and BOOT Support Attach and Detach Interrupt Surge Protection |
Catalog | -40 to 85 | UQFN | 1 | 15 | -32 | -26 | 7 | 9 | 0.5 | 0.2 | 0.2 | 2 | 0.5 | 95000 | 3500 | |||
| TSU5611 | SP3T Switch for Micro-USB applications with USB, UART and Audio switches and integrated impedance | 1:3 SP3T | 2 | 2.8 | 6.7 | 4.5 | 830 | 1.5 | USB 2.0 Audio Switch (Negative Rail Capability) Integrated LDO Impedance Detection |
Catalog | -40 to 85 | DSBGA | 1 | 8.8 | -50 | -75 | 0.24 | 1 | |||||||||||||
| TS3USB31E | High-Speed USB 2.0 (480-Mbps) 1-Port Switch With Single Enable | 1:1 SPST | 2 | 2.25 | 4.3 | 6.5 | 0 | 4.3 | 1 | 1100 | 8 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 10 | -53 | -30 | 2 | 6 | 0.07 | 2 | 0.25 | 0.35 | 30 | 25 | 1 | |||
| TS3USBA225 | DP3T USB 2.0 HIGH-SPEED (480Mbps) AND AUDIO SWITCHES | 1:3 SP3T | 2 | 2.7 | 4.3 | 6.5 | -1.8 | 4.3 | 50 | 1900 | 2 | USB 2.0 Mobile High-Definition Link (MHL) Audio Switch (Negative Rail Capability) Click-Pop Reduction Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 25 | 7.5 | -45 | -35 | 1 | 3 | 0.5 | 0.1 | 0.25 | 0.1 | 60 | 20 | |||
| TS3USB221A | ESD Protected,High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch | 1:2 SPDT | 2 | 2.3 | 3.6 | 3 | 0 | 5.5 | 30 | 900 | 7 | USB 2.0 Logic Controlled (Output Enabled) |
Catalog | -40 to 85 | UQFN | 1 | 6 | -40 | -41 | 3.5 | 6 | 1 | 1 | 0.25 | 0.2 | 17 | 10 | 1 | |||
| TSU6712 | SP4T Switch with Impedance Detection, Micro-USB switch to support USB, UART, Audio, and Video | 1:4 SP4T | 2 | 3 | 6.5 | 8 | -0.8 | 3.6 | 600 | 510 | 1.5 | USB 2.0 UART Audio Switch (Negative Rail Capability) Charging Capability I2C Interface JIG and BOOT Support Impedance Detection |
Catalog | -40 to 85 | DSBGA | 1 | 15 | -40 | -24 | 10 | 11 | 0.5 | 0.36 | 0.36 | 1 | 0.5 | 95000 | 2500 |
